|
Full Hydraulic Operation: Drop Centre Output Shaft, Two-Stage Reduction Gearing |
||||||
| PRM1500 series marine transmissions are the ideal choice for pleasure and commercial craft applications with engines rated at up to 526 hp (393 kW). They are available in both shallow and deep case form - corresponding to reduction ratios ranging from 1.22:1 to 3.0:1, and 3.12:1 to 4.9:1 respectively - and are supplied with integral SAE housings as standard. | ||||||
|
||||||
| Durable and Reliable | ||||||
|
||||||
| Two optional clutched power take-offs - compatible with SAE classification hydraulic pumps - are available to drive on-board machinery. Further ancillary equipment for PRM1500 gearboxes includes an oil pressure gauge, oil cooler kit and electrically operated control valve - incorporating a trolling valve facility that allows propeller speeds to be varied down to zero. This is fully inter-changeable with the standard control valve and can be retrofitted in service. | ||||||
| Nominal Power Ratings, PRM1500 Deep Case Marine Gearbox |
| MODEL | RATIOS | PLEASURE | LIGHT COMMERCIAL | HEAVY COMMERCIAL | |||||
| BHP | kW | BHP | kW | BHP | kW | ||||
|
3.12:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 | ||
|
3.88:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 | ||
|
4.50:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 | ||
|
4.90:1 | 18.28 | 13.63 | 16.87 | 12.58 | 15.46 | 11.53 | ||
| Maximum Operating Speeds: intermittent 3000 rev/min , continuous 2500 rev/min . | |||||||||
| (D) denotes Deep Case: manufactured only with integral SAE1 or SAE2 adaptor housings. If there is a need to convert from SAE1 to SAE3, then additional adaptor ring MT8239 will also be required. |
| Nominal Power Ratings, PRM1500 'A' Marine Gearbox (Angle Drive Only) |
| MODEL | RATIOS | PLEASURE | LIGHT COMMERCIAL | HEAVY COMMERCIAL | |||
| BHP | kW | BHP | kW | BHP | kW | ||
| 1500S12SAE3 | 1.22:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 |
| 1500S15SAE3 | 1.56:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 |
| 1500S19SAE3 | 1.94:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 |
| 1500S22SAE3 | 2.25:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 |
| 1500S24SAE3 | 2.45:1 | 21.06 | 15.70 | 19.65 | 14.65 | 18.28 | 13.63 |
| 1500S30SAE3 | 3.0:1 | 18.93 | 14.12 | 17.52 | 13.07 | 15.77 | 11.76 |
| Maximum Operating Speeds: intermittent 3000 rev/min , continuous 2500 rev/min . | |||||||
| (S) denotes Shallow Case: manufactured only with integral SAE3 adaptor housings. |
|
Note: These powers are expressed in BHP and kW per 100 rev/min engine operating speed, and are measured at the engine flywheel. Ratings have been established to ensure the long trouble-free life of the gearbox which should not, therefore be used at powers in excess of those shown. |
|
|
||||
![]() |
![]() |
![]() |
![]() |
|